|
Data Recovery
Quick Start
|
SP1654N SAMSUNG SpinPoint P80 160 GB Hard Drive Data Recovery
If you are looking a FIRM price for data recovery BEFORE you send the failed data media to the recovery lab, then this is the RIGHT place for you.
|

| Manufacturer / Family | SAMSUNG SpinPoint P80 |
| Storage Capacity | 160 GB | | Model | SP1654N | | Factory internal code | PALO |
|
Regular Service Data Recovery Price
$690
ONE FLAT PRICE covers any recovery procedures need to be taken, including software, firmware, and hardware recovery. Electronic components and Clean Room Repairs are included as well. There is no charge for using our parts.
Failed HDD Symptoms
We recover the data off of this hard drive regardless the symptoms, the drive's condition, such as broken, dead, not-spinning, clicking, ticking, or noisy drive; not detected by computer's BIOS or OS; burned circuit board elements, damaged surface; "Blue Screen" or any other issues: ONE FLAT PRICE
|
When applying for data recovery service for this drive, you may choose between Regular and Emergency services.
|
FLAT Price
for
Regular Service |
FLAT Price
for
Emergency Service |
SP1654N SAMSUNG SpinPoint P80 160 GB Hard Drive Data Recovery
|
|
|
Flat price covers ALL recovery procedures, including
- Clean Room Repairs (for all internal damages like clicking noises, heads damage,
motor
problems,
severe media damage
to platters;
These problems are fixed by opening the hard drive under clean room conditions)
- Firmware problems (Internal microcode damaged)
- Electronic components (burned PCB)
- Software recovery (File System corrupted; viruses; deleted files, etc.)
Turnaround time for regular and emergency services.
The regular turnaround time typically takes 3-5 days.
EMERGENCY SERVICE is available as well. The time frame for this type of data recovery service: same day if possible, or normally 1 to 2 days. The EMERGENCY SERVICE recovery cost is indicated in the price table above.
Please be aware of, in some complex recovery cases the recovery process time may be affected by capacity of hard drive and condition of surfaces on the disk.
For detailed information about our other optional services you may order, conditions, shipping cost, etc., please click here.
|
|
From customer's correspondence
|
Chet K.
Belleville, IL USA
Western Digital WD1000BB-00CAA0 100 GB
From Customer's order
This drive was installed as primary slave. No abnormal noises. One day on boot up got "Primary Slave Hard Drive Failure" Bios recognizes the drive but it is not accessible with DOS or Windows programs. Western Digital diagnostics returns S.M.A.R.T. error code 0159 (defective drive, replace). I did try using Get Data Back software. Get Data Back recognized the drive from Windows but did not recovery any data.
After recovery:
Expedient, very accurate, effective process.
Thank you,
Chet
|
Dan P.
Office Systems
Piqua, OH USA
Western Digital WD400BB-00DEA0 40 GB
From Customer's order
Hard drive functioned fine - shut down - NO work. Bios sees drive, device manager sees drive, disk manager no drive. WD diagnostics says cable not connected.
After recovery:
Thank you for recovering the data. Your service was much more than promised...
We could not possible for more of it. Our gratitude and complements to all recovery team.
Thanks again,
Dan
|
|